SpacePak, Spacepak, High velocity, SpacePak air conditioning, mini-duct, miniduct, mini duct, Unico
 
   
SpacePak® mini-duct high velocity
 

Our specialty, the perfect solution for adding air-conditioning and/or heating to historic homes and buildings, where ductwork is not practical, or impossible. The 2" inside diameter pre-insulated mini-ducts that run to each outlet(which can be ceiling, wall, or floor mounted) can be routed anywhere with ease, even through walls. Increasingly popular for installation in new construction and condo re-models to gain more ceiling height. SpacePak systems offer uniform temperatures, draft-free comfort, 30% greater humidity reduction, easy installation and super quiet operation. Choose between cooling only, heat pumps, auxiliary/primary electric heat, auxiliary/primary hot water heat, chilled water cooling, hot water heating. Chilled/hot water SpacePak systems can even be zoned using solenoid valves creating ultimate comfort and energy savings when using multiple air handlers. DX standard SpacePak systems can also be zoned in the plenum section using dampers allowing one air handler to individually control temperatures in distinct areas. Be sure to see the link below regarding zoning.

Also available are: 13-18 SEER Air Conditioners - 13-17 SEER Heat-Pumps - Boilers - Water Chillers

  
updated 10/01/2008
     
Authorized SpacePak Dealer
spacepak air conditioning removes up to 30 percent more moisture from the air
Custom Designed Systems
easy installation of SpacePak outlets
Finished look of spacepak outlets in ceilingoptional wooden spacepak air conditioning outlets in wood floor
spacepak mini supply tubes can run inside walls
Our Specialty!!
Ships Within USA and Global
 
Free SpacePak Help

Reference Materials

Low Price Guarantee

Installation Kits

Free Design and Planning

Supply Tubing

Planning Guide

Air Handlers

Sample System Equipment Lists

Sheet Metal Plenum Parts

Zoning SpacePak

Square Plenum Parts

Replacement Parts

Return Air Boxes and Duct

Architectural Outlets

Heaters

Condensers and Heat Pumps

Accessories

Shipping

Help Me!

View Everything

 

select the style of air hanlder you need for your application
Horizontal DX R22, R410a, Chilled Water or Vertical DX R22, R410a

 

SpacePak® - ESP-E - Horizontal Air Handler - Contractor/Self-Contractor Pricing

As the Series E sells out of inventory, it will be replaced with the series F below. The ESP-E series is a horizontal cooling/heat-pump fan coil unit with a DX (direct expansion / R-22) coil. Puron (R410a units are available). This SpacePak unit can be matched with a cooling only condensing unit, or a heat pump unit. For additional heating options with this unit, an electric duct heater or a hot water coil can be added. Electric duct heater must be installed horizontally. This unit can also convert to a vertical discharge, but must still lay horizontal. Line set 3/8x7/8. MEA approval: MEA-119-85-E. For more information, email us, or call sales at (813) 977-5286. INSTALLATION/OPERATION/MAINTENANCE | SPEC SHEET

SpacePak ESP-E, ESP2430EH2, ESP2430EH4, ESP-3642EH2, ESP3642EH4, ESP-4860EH2, ESP4860EH4, Horizontal high velocity mini-duct air handler
Model
Refrig
Tons
Volts
Design
Price
Purchase
ESP-2430EH2
R22
2.0 to 2.5
220
Horizontal
$1595.00
Quantity Desired:
ESP-3642EH2
R22
3.0 to 3.5
220
Horizontal
$1712.00
Quantity Desired:
ESP-4860EH2
R22
4.0 to 5.0
220
Horizontal
$1929.00
Quantity Desired:
ESP-2430EH4
R410a
2.0 to 2.5
220
Horizontal
$1595.00
Quantity Desired:
ESP-3642EH4
R410a
3.0 to 3.5
220
Horizontal
$1712.00
Quantity Desired:
ESP-4860EH4
R410a
4.0 to 5.0
220
Horizontal
$1929.00
Quantity Desired:

SpacePak® - ESP-F - Horizontal Air Handler - Contractor/Self-Contractor Pricing

The ESP-F series is a horizontal cooling/heat-pump fan coil unit with a DX (direct expansion / R-22) coil. Puron (R410a units are available). The F series has the capability of a remote mounted electric hookup instead of an internal hookup. This SpacePak unit can be matched with a cooling only condensing unit, or a heat pump unit. For additional heating options with this unit, an electric duct heater or a hot water coil can be added. Electric duct heater must be installed horizontally. This unit can also convert to a vertical discharge, but must still lay horizontal. Line set 3/8x7/8. MEA approval: MEA-119-85-E. For more information, email us, or call sales at (813) 977-5286. INSTALLATION/OPERATION/MAINTENANCE | AC-RMK REMOTE MOUNT PANEL KIT INSTRUCTIONS
SpacePak ESP-F, ESP2430FH2, ESP2430FH4, ESP-3642FH2, ESP3642FH4, ESP-4860FH2, ESP4860FH4, Horizontal high velocity mini-duct air handler
Model
Refrig
Tons
Volts
Design
Price
Purchase
ESP-2430FH2
R22
2.0 to 2.5
220
Horizontal
$1595.00
Quantity Desired:
ESP-3642FH2
R22
3.0 to 3.5
220
Horizontal
$1712.00
Quantity Desired:
ESP-4860FH2
R22
4.0 to 5.0
220
Horizontal
$1929.00
Quantity Desired:
ESP-2430FH4
R410a
2.0 to 2.5
220
Horizontal
$1595.00
Quantity Desired:
ESP-3642FH4
R410a
3.0 to 3.5
220
Horizontal
$1712.00
Quantity Desired:
ESP-4860FH4
R410a
4.0 to 5.0
220
Horizontal
$1929.00
Quantity Desired:
AC-RMK
-
-
220
Remote Electrical Hookup Panel Kit
$90.00
Quantity Desired:

SpacePak® - ESP-V - Vertical Air Handler - Contractor/Self-Contractor Pricing

The ESP-V series is a vertical discharge fan coil unit with a DX coil that can be used as a heat-pump or cooling only unit. For additional heating options, an electric duct heater can be added but the heater itself must be installed horizontally. For high efficiency, spacepak recommends using a 12 SEER or higher air-conditioner or heat-pump. Line set 3/8x7/8. For more information, email us, or call sales at (813) 977-5286. INSTALLATION/OPERATION/MAINTENANCE | SPEC SHEET
SpacePak ESP-V, ESP-2430-V, ESP-3642-V, ESP-4860-V, Vertical high velocity mini-duct air handler
Model
Refrig
Tons
Volts
Design
 Price Purchase
ESP-2430V
R22
2.0 to 2.5
220
Vertical
$1723.00
Quantity Desired:
ESP-3642V
R22
3.0 to 3.5
220
Vertical
$1813.00
Quantity Desired:
ESP-4860V
R22
4.0 to 5.0
220
Vertical
$2134.00
Quantity Desired:
ESP-2430V
R410a
2.0 to 2.5
220
Vertical
$1723.00
Quantity Desired:
ESP-3642V
R410a
3.0 to 3.5
220
Vertical
$1813.00
Quantity Desired:
ESP-4860V
R410a
4.0 to 5.0
220
Vertical
$2134.00
Quantity Desired:
 

SpacePak® - WCSP-D - Chilled/Hot Water Air Handler - Contractor/Self-Contractor Pricing

The WCSP-D series is a horizontal water coil air handler, which can be used with a chiller or boiler plant to provide heating or cooling, or both. The electric duct heater and an additional 2 row hot water coil can also be added as a second stage if required. This unit is also convertible to vertical discharge, but must still lay horizontal. 7/8 water in and out. MEA approval: MEA-119-85-E. For more information, email us, or call sales at (813) 977-5286. INSTALLATION/OPERATION/MAINTENANCE | SPEC SHEET
SpacePak WCSP-D, Horizontal high velocity mini-duct air handler, WCSP-2430D, WCSP-3642D, WCSP-4860D
Model
Tons
Volts
Design
Price
Purchase
WCSP-2430D
2.0 to 2.5
220
Horizontal
$2050.00
Quantity Desired:
WCSP-3642D
3.0 to 3.5
220
Horizontal
$2237.00
Quantity Desired:
WCSP-4860D
4.0 to 5.0
220
Horizontal
$2364.00
Quantity Desired:

Select either square fiberboard or round sheet metal plenum parts
Square Fiberboard or Round Sheet Metal

 

SpacePak® - Square Components - Contractor/Self-Contractor Pricing

Square R-4.2 plenum and accessories are now normal stock. An adapter will be needed to connect the new square plenum up to the air handlers. Yes, a round duct option is now available, the high velocity sheet metal is an R8 insulated spiral duct, see the Round section below for those parts. If you need an equipment layout diagram, the link is below. For more information, email us, or call sales at (813) 977-5286. LAYOUT DIAGRAM | INSTALLATION INSTRUCTIONS | TYPICAL EQUIPMENT LIST
Part#
Description
Price
Purchase
SPS-PD-6
SpacePak® PLENUM DUCT - Square 10" OD, 4' long. *take-offs must be 18" minimum from each other, so order enough plenum to account for this.*
$40.95
Quantity:
SPS-EC-10
SpacePak® END CAP for Square Plenum
$18.00
Quantity:
SPS-T-4
SpacePak® TEE for Square Plenum
$62.00
Quantity:
SPS-H-1
SpacePak® H for Square Plenum
$217.00
Quantity:
SPS-90-4
SpacePak® 90° ELBOW for Square Plenum
$63.00
Quantity:
SPS-45-4
SpacePak® 45° ELBOW for Square Plenum
$63.00
Quantity:
BM-3007
SpacePak® ADAPTOR - Required to attach square plenum to air handlers
$31.00
Quantity:
SPC-25-100
SpacePak® SUPPLY TUBE - R-4.2 flexible insulated 2" ID supply duct 100' roll
$347.00
Quantity:
AC-ST6-75
SpacePak® SUPPLY TUBE - R-6.0 flexible insulated 2" ID supply duct 75' roll
$360.00
Quantity:
AC-ST8-50
SpacePak® SUPPLY TUBE - R-8.0 flexible insulated 2" ID supply duct 50' roll
$320.00
Quantity:
AC-IKLT-5
SpacePak® 5 OUTLET INSTALLATION KIT (outlets, winter supply shut-offs, kwik connects, hardware, balancing orifices, 3' sound attenuating tubing) Order plenum takeoffs below.
$259.00
Quantity:
AC-TKFS-5
SpacePak® 5 OUTLET PLENUM TAKE OFFS - Flat Square Plenum
$55.00
Quantity:
AC-IKLT-2
SpacePak® 2 OUTLET INSTALLATION KIT (outlets, winter supply shut-offs, kwik connects, hardware, balancing orifices, 3' sound attenuating tubing) Order plenum takeoffs below.
$103.00
Quantity:
AC-TKFS-2
SpacePak® 2 OUTLET PLENUM TAKE OFFS - Flat Square Plenum
$22.00
Quantity:
BM-3008
SpacePak® Extra Plenum Take-Off (w/gasket & clips)
$11.00
Quantity:
AC-KCWE SpacePak® mini-duct 90° elbow for tight turns in walls before outlets. 3.25" deep w/ integrated kwik connects (5-pack) $76.00
Quantity:
     
 

High Velocity - R8 Round Sheet Metal Components - Contractor/Self-Contractor Pricing

Commercial grade high quality spiral high velocity R8 insulated round sheet metal plenum ducts and accessories with self-sealing gaskets. Designed specifically for high velocity applications. Use this main plenum duct and the accessories in place of the SpacePak square plenum. You will still use the SpacePak air handlers, return air components, plenum take offs, mini-supply tubing and outlets. All 6' plenum sections are shipped with 8' of R8 insulation pre-wrapped for ease of installation. Couplers are needed between straight plenum sections. For more information, email us, or call sales at (813) 977-5286. LAYOUT DIAGRAM | TYPICAL EQUIPMENT LIST

Part#
Description
Price
Purchase
HVSPI9
PLENUM DUCT - Round 9" OD Sheet Metal Plenum Duct 6'. *take-offs must be 18" minimum from each other, so order enough plenum to account for this.*
$98.00
Quantity:
HVEL90
90° ELBOW for Sheet Metal Plenum
$93.00
Quantity:
HVEL45
45° ELBOW for Sheet Metal Plenum
$68.00
Quantity:
HVC
CONNECTOR/COUPLER - Required for Joining Straight Sheet Metal Plenum Sections
$25.00
Quantity:
HVEND
END CAP for Sheet Metal Plenum
$30.00
Quantity:
HVTEE
TEE for Sheet Metal Plenum
$103.00
Quantity:
BM-4001
SpacePak® ADAPTOR - Required to attach round plenum to air handler *when combining this with a secondary drain pan you will need to place a 2" spacer between the drain pan supports and the air handler.*
$35.00
Quantity:
AC-ST8-50
SpacePak® SUPPLY TUBE - R-8.0 flexible insulated 2" ID supply duct 50' roll
$320.00
Quantity:
AC-ST6-75
SpacePak® SUPPLY TUBE - R-6.0 flexible insulated 2" ID supply duct 75' roll
$360.00
Quantity:
SPC-25-100
SpacePak® SUPPLY TUBE - R-4.2 flexible insulated 2" ID supply duct 100' roll
$347.00
Quantity:
AC-IKLT-5
SpacePak® 5 OUTLET INSTALLATION KIT (outlets, winter supply shut-offs, kwik connects, hardware, balancing orifices, 3' sound attenuating tubing) Order plenum takeoffs below.
$259.00
Quantity:
AC-TKMR-5
SpacePak® 5 OUTLET PLENUM TAKE OFFS - Metal RoundPlenum
$72.00
Quantity:
AC-IKLT-2
SpacePak® 2 OUTLET INSTALLATION KIT (outlets, winter supply shut-offs, kwik connects, hardware, balancing orifices, 3' sound attenuating tubing) Order plenum takeoffs below.
$103.00
Quantity:
AC-TKMR-2
SpacePak® 2 OUTLET PLENUM TAKE OFFS - Metal Round Plenum
$29.00
Quantity: