SpacePak, Spacepak, High velocity, mini-duct, miniduct, mini duct, Unico
 
   
SpacePak® mini-duct high velocity
 

The perfect solution for adding air-conditioning and/or heating to historic homes and buildings, where ductwork is not practical, or impossible. The 2" inside diameter pre-insulated mini-ducts that run to each outlet(which can be ceiling, wall, or floor mounted) can be routed anywhere with ease, even through walls. Increasingly popular for installation in new construction and condo re-models to gain more ceiling height. SpacePak systems offer uniform temperatures, draft-free comfort, 30% greater humidity reduction, easy installation and super quiet operation. Chose between cooling only, heat pumps, auxiliary/primary electric heat, auxiliary/primary hot water heat, chilled water cooling, hot water heating. Chilled/hot water SpacePak systems can even be zoned using solenoid valves creating ultimate comfort and energy savings when using multiple air handlers. DX standard SpacePak systems can also be zoned in the plenum section using dampers allowing one air handler to individually control temperatures in distinct areas.

Also available: SpacePak Equipment - 12-18 SEER Air Conditioners - 12-17 SEER Heat-Pumps - Boilers - Water Chillers

  
 
SpacePak, Space Pak, mini-duct, mini duct, high velocity, 

SpacePak® - Square - Typical List Of Equipment

Use the following as a guide for planning and selecting the equipment you will need for a successful SpacePak system. In the section below are typical components and quantities. You may need more or less of certain items based on your design specifications. These are based on 7 take-off's per ton and supply air runs of 15' each(12' of supply tube plus the 3' of sound attenuating tubing. If you still need more help, please send us an email, or call us up for some help.
Model Description 2-tons 2.5-tons 3-tons 3.5-tons 4-tons 5-tons
ESP-2430 2-2.5-ton Fan Coil 1 unit 1 unit - - - -
ESP-3642 3-3.5-ton Fan Coil - - 1 unit 1 unit - -
ESP-4860 4-5-ton Fan Coil - - - - 1 unit 1 unit
SPS-KIT-2 (AC-IKLT-2 + AC-TKFS-2) Installation kit for 2 outlets. Includes 2 sound attenuation tubes w/ kwik connects, 4 kwik connects, 2 terminator plates w/ clips and screws, 3 balancing orifices, 2 winter supply air shut offs, plenum take off kit for 2 terminators w/ clips and gaskets 2 kits 4 kits 3 kits - 4 kits -
SPS-KIT-5 (AC-IKLT-5 + AC-TKFS-5) Installation kit for 5 outlets. Includes 5 sound attenuation tubes w/ kwik connects, 10 kwik connects, 5 terminator plates w/ clips and screws, 6 balancing orifices, 5 winter supply air shut offs, plenum take off kit for 5 terminators w/ clips and gaskets 2 kits 2 kits 3 kits 5 kits 4 kits 7 kits
SPS-PD-6 Plenum Duct - 4' 6 pieces 6 pieces 8 pieces 8 pieces 12 pieces 12 pieces
SPS-T-4 Plenum Tee 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
SPC-EC-10 Plenum End Caps 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces
SPS-90-4 90° Plenum Elbow 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
BM-3007 Plenum To Fan Coil Adapter 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
SPC-25-100 or AC-ST8-50 Supply Tubing 2" ID, 100' Roll or R8 50' roll(double roll quantities listed) 2 rolls 3 rolls 3 rolls 3 rolls 4 rolls 5 rolls
SPC-1D or AC-RBC-2 Return Air Box or PurePak Air Cleaner Return Air Box for 2-2.5-ton system 1 unit 1 unit - - - -
AC-RBF-3 or AC-RBC-3 Return Air Box or PurePak Air Cleaner Return Air Box for 3-3.5-ton system - - 1 unit 1 unit - -
SPC-3D or AC-RBC-5 Return Air Box or PurePak Air Cleaner Return Air Box for 4-5-ton system - - - - 1 unit 1 unit
SPC-4 Return Air Duct - 10' for 2-2.5-ton 1 piece 1 piece - - - -
SPC-5 Return Air Duct - 10' for 3-3.5-ton - - 1 piece 1 piece - -
SPC-6 Return Air Duct - 10' for 4-5-ton - - - - 1 piece 1 piece
- Condensing Unit or Heat Pump 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit
- Secondary Drain Pan option option option option option option
- Hot Water Coils option option option option option option
- Electric Heater Module option option option option option option

 

SmartPak Round - Typical List Of Equipment

Use the following as a guide for planning and selecting the equipment you will need for a successful SpacePak system. In the section below are typical components and quantities. You may need more or less of certain items based on your design specifications. These are based on 7 take-off's per ton and supply air runs of 15' each(12' of supply tube plus the 3' of sound attenuating tubing. If you still need more help, please send us an email, or call us up for some help.
Model Description 2-tons 2.5-tons 3-tons 3.5-tons 4-tons 5-tons
ESP-2430 2-2.5-ton Fan Coil 1 unit 1 unit - - - -
ESP-3642 3-3.5-ton Fan Coil - - 1 unit 1 unit - -
ESP-4860 4-5-ton Fan Coil - - - - 1 unit 1 unit
AC-IKLT-2 + AC-TKMR-2 Installation kit for 2 outlets. Includes 2 sound attenuation tubes w/ kwik connects, 4 kwik connects, 2 terminator plates w/ clips and screws, 3 balancing orifices, 2 winter supply air shut offs, plenum take off kit for 2 terminators w/ clips and gaskets 2 kits 4 kits 3 kits - 4 kits -
AC-IKLT-5 + AC-TKMR-5 Installation kit for 5 outlets. Includes 5 sound attenuation tubes w/ kwik connects, 10 kwik connects, 5 terminator plates w/ clips and screws, 6 balancing orifices, 5 winter supply air shut offs, plenum take off kit for 5 terminators w/ clips and gaskets 2 kits 2 kits 3 kits 5 kits 4 kits 7 kits
AC-SSD8 Plenum Duct - 8' 2 pieces 2 pieces 3 pieces 3 pieces 5 pieces 5 pieces
AC-SSD4 Plenum Duct - 4' 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces
AC-SST Plenum Tee 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
AC-SSEC Plenum End Caps 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces
AC-SSEL 90° Plenum Elbow 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
AC-SSPA Plenum To Fan Coil Adapter 10 pieces 10 pieces 10 pieces 10 pieces 20 pieces 20 pieces
AC-SSJS Plenum Coupler - between each component
varies
varies
varies
varies
varies
varies
SPC-25-100 or AC-ST8-50 Supply Tubing 2" ID, 100' Roll or R8 50' roll(double roll quantities listed) 2 rolls 3 rolls 3 rolls 3 rolls 4 rolls 5 rolls
SPC-1D or AC-RBC-2 Return Air Box or PurePak Air Cleaner Return Air Box for 2-2.5-ton system 1 unit 1 unit - - - -
AC-RBF-3 or AC-RBC-3 Return Air Box or PurePak Air Cleaner Return Air Box for 3-3.5-ton system - - 1 unit 1 unit - -
SPC-3D or AC-RBC-5 Return Air Box or PurePak Air Cleaner Return Air Box for 4-5-ton system - - - - 1 unit 1 unit
SPC-4 Return Air Duct - 10' for 2-2.5-ton 1 piece 1 piece - - - -
SPC-5 Return Air Duct - 10' for 3-3.5-ton - - 1 piece 1 piece - -
SPC-6 Return Air Duct - 10' for 4-5-ton - - - - 1 piece 1 piece
- Condensing Unit or Heat Pump 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit
- Secondary Drain Pan option option option option option option
- Hot Water Coils option option option option option option
- Electric Heater Module option option option option option option

 

Sheet Metal R8 Round - Typical List Of Equipment

Use the following as a guide for planning and selecting the equipment you will need for a successful SpacePak system. In the section below are typical components and quantities. You may need more or less of certain items based on your design specifications. These are based on 7 take-off's per ton and supply air runs of 15' each(12' of supply tube plus the 3' of sound attenuating tubing. If you still need more help, please send us an email, or call us up for some help.
Model Description 2-tons 2.5-tons 3-tons 3.5-tons 4-tons 5-tons
ESP-2430 2-2.5-ton Fan Coil 1 unit 1 unit - - - -
ESP-3642 3-3.5-ton Fan Coil - - 1 unit 1 unit - -
ESP-4860 4-5-ton Fan Coil - - - - 1 unit 1 unit
AC-IKLT-2 + AC-TKMR-2 Installation kit for 2 outlets. Includes 2 sound attenuation tubes w/ kwik connects, 4 kwik connects, 2 terminator plates w/ clips and screws, 3 balancing orifices, 2 winter supply air shut offs, plenum take off kit for 2 terminators w/ clips and gaskets 2 kits 4 kits 3 kits - 4 kits -
AC-IKLT-5 + AC-TKMR-5 Installation kit for 5 outlets. Includes 5 sound attenuation tubes w/ kwik connects, 10 kwik connects, 5 terminator plates w/ clips and screws, 6 balancing orifices, 5 winter supply air shut offs, plenum take off kit for 5 terminators w/ clips and gaskets 2 kits 2 kits 3 kits 5 kits 4 kits 7 kits
HVSPI9 Plenum Duct - 6' 4 pieces 4 pieces 6 pieces 6 pieces 8 pieces 8 pieces
HVTEE Plenum Tee 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
HVEND Plenum End Caps 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces
HVEL90 90° Plenum Elbow 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
BM-4001 Plenum To Fan Coil Adapter 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
HVC Plenum Coupler - between each straight plenum section
varies
varies
varies
varies
varies
varies
SPC-25-100 or AC-ST8-50 Supply Tubing 2" ID, 100' Roll or R8 50' roll(double roll quantities listed) 2 rolls 3 rolls 3 rolls 3 rolls 4 rolls 5 rolls
SPC-1D or AC-RBC-2 Return Air Box or PurePak Air Cleaner Return Air Box for 2-2.5-ton system 1 unit 1 unit - - - -
AC-RBF-3 or AC-RBC-3 Return Air Box or PurePak Air Cleaner Return Air Box for 3-3.5-ton system - - 1 unit 1 unit - -
SPC-3D or AC-RBC-5 Return Air Box or PurePak Air Cleaner Return Air Box for 4-5-ton system - - - - 1 unit 1 unit
SPC-4 Return Air Duct - 10' for 2-2.5-ton 1 piece 1 piece - - - -
SPC-5 Return Air Duct - 10' for 3-3.5-ton - - 1 piece 1 piece - -
SPC-6 Return Air Duct - 10' for 4-5-ton - - - - 1 piece 1 piece
- Condensing Unit or Heat Pump 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit
- Secondary Drain Pan option option option option option option
- Hot Water Coils option option option option option option
- Electric Heater Module option option option option option option

 
Free SpacePak Help

Reference Materials

Low Price Guarantee

Installation Kits

Free Design and Planning

Supply Tubing

Planning Guide

Air Handlers

Sample System Equipment Lists

Round Plenum Parts

Zoning SpacePak

Square Plenum Parts

Replacement Parts

Return Air Boxes and Duct

Architectural Outlets

Heaters

Condensers and Heat Pumps

Accessories

Shipping

Help Me!

View Everything