SpacePak, Spacepak, High velocity, SpacePak air conditioning, mini-duct, miniduct, mini duct, Unico
 
   
SpacePak® Reference Materials
 

Our specialty, the perfect solution for adding air-conditioning and/or heating to historic homes and buildings, where ductwork is not practical, or impossible. The 2" inside diameter pre-insulated mini-ducts that run to each outlet(which can be ceiling, wall, or floor mounted) can be routed anywhere with ease, even through walls. Increasingly popular for installation in new construction and condo re-models to gain more ceiling height. SpacePak systems offer uniform temperatures, draft-free comfort, 30% greater humidity reduction, easy installation and super quiet operation. Choose between cooling only, heat pumps, auxiliary/primary electric heat, auxiliary/primary hot water heat, chilled water cooling, hot water heating. Chilled/hot water SpacePak systems can even be zoned using solenoid valves creating ultimate comfort and energy savings when using multiple air handlers. DX standard SpacePak systems can also be zoned in the plenum section using dampers allowing one air handler to individually control temperatures in distinct areas. Be sure to see the link below regarding zoning.

Also available are: 13-18 SEER Air Conditioners - 13-17 SEER Heat-Pumps - Boilers - Water Chillers

 
updated 10/14/2009
     
Authorized SpacePak Dealer
spacepak air conditioning removes up to 30 percent more moisture from the air
Custom Designed Systems
easy installation of SpacePak outlets
Finished look of spacepak outlets in ceilingoptional wooden spacepak air conditioning outlets in wood floor
spacepak mini supply tubes can run inside walls
Our Specialty!!
Ships Within USA and Global

 

SpacePak® - Guidance/Reference Materials

Use the following links to help you plan your SpacePak system correctly, or to view an installation movie. If you still need more help, please send us an email, or call us at 813-977-5286 for some help.

SpacePak Brochure
HELP ME
2430 Air Handlers (fully open outlets)
Square Plenum Layout Diagram
min 12 outlets for 2.0-ton system
Individual Room Sizing Estimator
min 15 outlets for 2.5-ton system
total cfm = 550
3642 Air Handlers (fully open outlets)
1.5 to 10 Ton Water Chillers
min 18 outlets for 3.0-ton system .
min 21 outlets for 3.5-ton system .
total cfm = 850 Zoning Design
4860 Air Handlers (fully open outlets)
3.5 outlets/ton/zone minimum
min 26 outlets for 4.0-ton system up to 5 outlets/ton/zone on a 2-zone system
min 30 outlets for 5.0-ton system Air Flow Design
total cfm = 1150 maintain 33-44 cfm per outlet.

 

SpacePak® - Brochures/Installation/Operation/Training

Use the following links to help you plan your SpacePak system correctly, or to view an installation movie. If you still need more help, please send us an email, or call us at 813-977-5286 for some help.

AHRI Data EDH Heater Guidelines Decorative Cover Installation Powerpoint Sizing
Preserve Architectural Integrity AC-EPAK Installation Metal Outlet Installation Powerpoint Return Install
Product Info / Application AC-EPAK Notice SPC-72 Pliers Instructions Powerpoint Air Handler Install
Application Manual E/F Series Heat Module Install AC-BASE Installation Powerpoint Condensate
Troubleshooting HWC Coil Installation ESP-F Specs Powerpoint Linesets
F Series Square Duct Installation AC-WPAK Installation ESP-V specs Powerpoint Plenum Layout
Square Duct Installation PurePak Brochure WCSP Specs Powerpoint Tubing Runs
ESP-F Install/Operation PurePak Installation HWC-D Specs Powerpoint Attenuators
AC-RKM Installation PurePak Maint AC-EPAK Specs SpacePak View
WCSP Install/Operation PurePak Info AC-RKM Specs SpacePak View
ESP-V Install/Operation Architectural Outlets ESP-E Specs SpacePak View
ESP-E Install/Operation Wood Outlet Flush Installation Powerpoint Contractor Training SpacePak View
ESP-D Install/Operation Wood Outlet Surface Insallation Powerpoint Components SpacePak View

 

SpacePak® - What Parts Do I Need?

We will provide you with free sizing and layout help if you desire. To help you understand what steps are involved in planning your SpacePak high velocity system correctly and selecting the right parts, visit our help page. If you still need more help, please send us an email, or call us up for some help at 813-977-5286.

Planning Guide
Typical Equipment List

 

Free SpacePak Help

Reference Materials

Low Price Guarantee

Installation Kits

Free Design and Planning

Supply Tubing

Planning Guide

Air Handlers

Sample System Equipment Lists

Round Plenum Parts

Zoning SpacePak

Square Plenum Parts

Replacement Parts

Return Air Boxes and Duct

Architectural Outlets

Heaters

Condensers and Heat Pumps

Accessories

Shipping

Help Me!

View Everything

View All SpacePak Optional Outlets

Press here to learn more about zoning with SpacePak.