1source2buy.com - SpacePak® High Velocity Sheet Metal Plenum Parts

	SpacePak® Sheet Metal Plenum Parts
	Our specialty, the perfect solution for adding air-conditioning and/or heating to historic homes and buildings, where ductwork is not practical, or impossible. The 2" inside diameter pre-insulated mini-ducts that run to each outlet(which can be ceiling, wall, or floor mounted) can be routed anywhere with ease, even through walls. Increasingly popular for installation in new construction and condo re-models to gain more ceiling height. SpacePak systems offer uniform temperatures, draft-free comfort, 30% greater humidity reduction, easy installation and super quiet operation. Choose between cooling only, heat pumps, auxiliary/primary electric heat, auxiliary/primary hot water heat, chilled water cooling, hot water heating. Chilled/hot water SpacePak systems can even be zoned using solenoid valves creating ultimate comfort and energy savings when using multiple air handlers. DX standard SpacePak systems can also be zoned in the plenum section using dampers allowing one air handler to individually control temperatures in distinct areas. Be sure to see the link below regarding zoning. Also available are: 13-18 SEER Air Conditioners - 13-17 SEER Heat-Pumps - Boilers - Water Chillers
	updated 10/01/2008

Authorized SpacePak Dealer

Custom Designed Systems

Finished look of spacepak outlets in ceiling

optional wooden spacepak air conditioning outlets in wood floor

spacepak mini supply tubes can run inside walls

Our Specialty!!

Ships Within USA and Global

Round Sheet Metal

High Velocity - R8 Round Sheet Metal Components - Contractor/Self-Contractor Pricing

Commercial grade high quality spiral high velocity R8 insulated round sheet metal plenum ducts and accessories with self-sealing gaskets. Designed specifically for high velocity applications. Use this main plenum duct and the accessories in place of the SpacePak square plenum. You will still use the SpacePak air handlers, return air components, plenum take offs, mini-supply tubing and outlets. All 6' plenum sections are shipped with 8' of R8 insulation pre-wrapped for ease of installation. Couplers are needed between straight plenum sections. For more information, email us, or call sales at (813) 977-5286. LAYOUT DIAGRAM | TYPICAL EQUIPMENT LIST

Part#	Description	Price	Purchase
HVSPI9	PLENUM DUCT - Round 9" OD Sheet Metal Plenum Duct 6'. take-offs must be 18" minimum from each other, so order enough plenum to account for this.	$98.00	Quantity:
HVEL90	90° ELBOW for Sheet Metal Plenum	$93.00	Quantity:
HVEL45	45° ELBOW for Sheet Metal Plenum	$68.00	Quantity:
HVC	CONNECTOR/COUPLER - Required for Joining Straight Sheet Metal Plenum Sections	$25.00	Quantity:
HVEND	END CAP for Sheet Metal Plenum	$30.00	Quantity:
HVTEE	TEE for Sheet Metal Plenum	$103.00	Quantity:
BM-4001	SpacePak® ADAPTOR - Required to attach round plenum to air handler when combining this with a secondary drain pan you will need to place a 2" spacer between the drain pan supports and the air handler.	$35.00	Quantity:
AC-ST8-50	SpacePak® SUPPLY TUBE - R-8.0 flexible insulated 2" ID supply duct 50' roll	$320.00	Quantity:
AC-ST6-75	SpacePak® SUPPLY TUBE - R-6.0 flexible insulated 2" ID supply duct 75' roll	$360.00	Quantity:
SPC-25-100	SpacePak® SUPPLY TUBE - R-4.2 flexible insulated 2" ID supply duct 100' roll	$347.00	Quantity:
AC-IKLT-5	SpacePak® 5 OUTLET INSTALLATION KIT (outlets, winter supply shut-offs, kwik connects, hardware, balancing orifices, 3' sound attenuating tubing) Order plenum takeoffs below.	$259.00	Quantity:
AC-TKMR-5	SpacePak® 5 OUTLET PLENUM TAKE OFFS - Metal RoundPlenum	$72.00	Quantity:
AC-IKLT-2	SpacePak® 2 OUTLET INSTALLATION KIT (outlets, winter supply shut-offs, kwik connects, hardware, balancing orifices, 3' sound attenuating tubing) Order plenum takeoffs below.	$103.00	Quantity:
AC-TKMR-2	SpacePak® 2 OUTLET PLENUM TAKE OFFS - Metal Round Plenum	$29.00	Quantity:
AC-TORD	SpacePak® Extra Plenum Take-Off (w/gasket & clips)	$14.00	Quantity:
AC-KCWE	SpacePak® mini-duct 90° elbow for tight turns in walls before outlets. 3.25" deep w/ integrated kwik connects (5-pack)	$76.00	Quantity:

R6 Round Sheet Metal Components

7" and 9" round 26 gauge sheet metal ductwork and accessories. For use with standard and high velocity systems. All 5' plenum sections can be insulated by using the R6 insulation sleeve listed below. Sections are fitted together and then screwed and taped together using Aluminum tape. The 2430 can use 7" plenum for a maximum of 45 feet. 3642 and 4860 must use the 9" plenum. For more information, email us, or call sales at (813) 977-5286.

Part#	Description	Price	Purchase
51926	Plenum - 5' Length, Round Sheet Metal - 9" OD	$18.68	Quantity:
011R69	Insulation - 5' sleeve of R6 - 9"	$8.38	Quantity:
81926	90° Elbow - 9"	$8.10	Quantity:
1219	Tee - 9"	$21.45	Quantity:
1239	End Cap - 9"	$8.65	Quantity:
82926	45° Bend - 9"	$7.21	Quantity:
4926	Round 9" OD Sheet Metal Plenum Duct 2'	$9.44	Quantity:
--	7" Plenum - 2430 models only	--	--
51726	Plenum - 5' Length, Round Sheet Metal - 7" OD	$14.42	Quantity:
011R67	Insulation - 5' sleeve of R6 - 7"	$7.20	Quantity:
1217	Tee - 7"	$14.72	Quantity:
81726	90° Elbow - 7"	$6.18	Quantity:
1237	End Cap - 7"	$7.65	Quantity:
6597	9" to 7" reducer	$8.89	Quantity:

Reference Materials	Low Price Guarantee
Installation Kits	Free Design and Planning
Supply Tubing	Planning Guide
Air Handlers	Sample System Equipment Lists
Sheet Metal Plenum Parts	Zoning SpacePak
Square Plenum Parts	Replacement Parts
Return Air Boxes and Duct	Architectural Outlets
Heaters	Condensers and Heat Pumps
Accessories	Shipping
Help Me!	View Everything